Prod Model: |
SP series |
Markets: |
Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Type: |
Professional Amplifier |
Usage: |
Lvie Concert, Touring, Stadium and Disco etc. |
Used For: |
Professional |
Tube Type: |
Transistor Amplifier |
Function: |
Pre-amplifier |
Voltage: |
AC 220V |
Element Number: |
Push-Pull Amplifier |
Conductive Mode: |
AB |
Product Description
Product overview:
SP series expand from FP series, there are total 4 models, and the power range from 700w to 2500w per channel or 1400w to 5000w total output power, they are advanced and efficient amplifiers which be perfect for installations with modest power requirements. Housed in a compact two rack space chassis and weighing only 18 lbs, and designed to drive 4 or 8 Ohm loads. 4 models are available in 2 and 4-channel configurations. Plus UK 40 years and traditional design of the amplifier stage,
Applications: live concept, touring, stadium and disco etc.
Powerful Perfect ferrite core from N87 EPCOS or 3F3 PHILIPS and good copper foil to get powerful and stable transformer, therefore we can produce solid bass SMPS amplifier.
EE65 PLUS ferrite core can do 8000w with 100 KHz switching frequency, and our amp only produce about 5000w maximum, we have 3000w power capability more to be the power back up, so that you can easily to expect the perfect dynamic performance.
Experienced design of the heat sink and tunnel cooling system bring you a cool amp and silence amp by extending the amplifier life, and provide you a trouble free stuff.
Technical specification:
Item | Model | SP2600 | SP2400 | SP4600 | SP4400 |
Feature | SP series expand from FP series, there are total 4 models, and the power range from 700w to 2500w per channel or 1400w to 5000w total output power, they are advanced and efficient amplifiers which be perfect for installations with modest power requirements. Housed in a compact two rack space chassis and weighing only 18 lbs, and designed to drive 4 or 8 Ohm loads. 4 models are available in 2 and 4-channel configurations. Plus UK 40 years and traditional design of the amplifier stage, Applications: live concept, touring, stadium and disco etc.
Powerful Perfect ferrite core from N87 EPCOS or 3F3 PHILIPS and good copper foil to get powerful and stable transformer, therefore we can produce solid bass SMPS amplifier.
EE65 PLUS ferrite core can do 8000w with 100 KHz switching frequency, and our amp only produce about 5000w maximum, we have 3000w power capability more to be the power back up, so that you can easily to expect the perfect dynamic performance.
Experienced design of the heat sink and tunnel cooling system bring you a cool amp and silence amp by extending the amplifier life, and provide you a trouble free stuff. |
Frequency Response | 20Hz~20KHz,+/-0.5dB |
S/N Ratio, Unweighted | 97dB | 97dB | 95dB | 95dB |
THD (At Half Rated Power) | 0.05% | 0.09% |
Damping Factor (8 ohm20-400Hz): | >250 |
Crosstalk(Below -3dB Rated Power) | 80dB | 75dB |
Gain (at max. Level,0.775V,+/-5%) | 38.2dB | 36.7dB | 39.1dB | 37.2dB |
SlewRate(Below -3dB Rated Power) | 20V/Us | |
Output Power | 8 ohm | 2X500W | 2X350W | 4X600W | 4X400W |
4 ohm | 2X700W | 2X490W | 4X950W | 4X750W |
2 ohm | 2X840W | 2X588W | 4X1100W | 4X850W |
8 ohm Bridge | NA | NA | 2X1900W | 2X1500W |
4 ohm Bridge | NA | NA | 2X 2200W | 2X1700W |
Required AC Mains | 220Vac 50~60Hz |
Dissipation Power At Idle | <20W | <45W |
Controls | Power | On-Off, On Front Panel |
Level | -80dB~0dB, On Front Panel |
Mode | NA | On the front, 2 push switch |
Sensitivity | NA | NA |
Limiter | Built-in | Built-in |
Filter | NA | NA |
Ground Lift | NA | NA |
30Hz Low Cut | NA | NA |
Indicators | Power | Green LED on the front panel |
Signal | Green LED on the front panel |
Protection | Red LED on the front panel |
Clip | Red LED on the front panel |
Bridge | N/A | Green LEDs, on front panel |
Input& Outputs | Input Connects | XLR-F, XLR-M | | | |
Input Impedance | 10KΩ unbalanced, 20KΩ balanced | |
Output Connectors | Speakon | | | |
Output DC Offset | 3mV | | | |
Protection | Clip Limiter, Short Circuit, Thermal, DC Voltage, Soft Start, Subsonic Signal, SSC, DRC,HF | |
Contruction | Material | Steel Chassis | |
Cooling | Force-Cooling System, One(two fans for SP4400 SP4600) Variable Speed Fans | |
Unit Dimensions | 483*89*320mm | 483*89*390mm |
Packing Dimensions | 590*420*160mm | 590*490*160mm |
Net Weight | 8.0KG | 8.0KG | 11.7KG | 11.3KG |
Shipping Weight | 9.5KG | 9.5KG | 13.5KG | 13.1KG |
AC Fuse | T10A250Vac | T10A250Vac | T20A250Vac | T20A250Vac |
Accessary | User's Manual, Power Cord, Warranty card |
McGregor Amplifier China, we are the manufacturer had made profession amplifier more than ten years export experience.
In 2012, we got the famous professional amplifier brand McGregor Amplification in UK(founded in 1974s) authorize the only factory can produce their amplifier in China and sell amplifiers all over the world. All the production will be tested qualified by McGregor.
Now, we have 7 series of amplifiers, EPC, MA, ST, SP, FP, Ci, K series, MA and ST are big power items, SP, FP, Ci Series are perfect sound AMP from British.
We also accept OEM and ODM, we made OEM for OHM. UK., BELL. DE, AD-SYSTEM. DE, Studio Master.
We can guarantee the quality, promise offering good quality for you.