Olycom OM610 series of optical transmitter and receiver offer a wide selection of configurations, ranging from a simple setup with a single channel of a specific type of signal to sophisticated solutions with many channels of different signals (video, audio, data, telephone, alarm, and Ethernet). The flexible configurations are open to customization and ODM to cater various needs.
We support for more configurations / customization / OEM / ODM.
Key Features1.Robust metal casings
2.Low optical link loss max 30dB
3.Without EMI, RFI and ground loop
4.Bi-di transmission on 1 fiber with WDM
5.High quantification level of 8BIT
6.Hot plug-and-play with switch power supply
7.Available in standalone and 19"3U rack systems
Specification| Optical |
| Wavelength | 1310nm/1550nm |
| Output Power | -8~3dBm |
| Optic Fiber | Single mode (9/125um) 20Km to 80Km
Multimode (50/125um) 1Km, ( 62.5/125um) 500m |
| Receiving Sensitivity | -30dBm |
| Interface | FC/ST/SC/LC |
| Video |
| Bandwidth | 8MHZ |
| Compatible Systems | NTSC/PAL/SECAM |
| Impedance/Voltage | BNC 75Ω (unbalanced) / 2.0Vp-p |
| Differential Gain | < ±1% |
| Differential Phase | < ±1 |
| S/N ratio | >60dB(weighting)(8 bit) |
| Interface | BNC |
| Data |
| Data Protocol | RS232, RS422, RS485, Manchester, BIPHASE data |
| Bandwidth | 0~300kbps |
| Error rate | 10 -9 |
| Interface | Phoenix terminal |
| Audio |
| Impedance / Voltage | 600ohm(unbalanced) / 2.0Vp-p |
| Frequency Response | 10~20kHz |
| Total Harmonic Distortion | <0.05% |
| Differential Phase | < ±1 |
| S/N ratio | >95dB(weighting) |
| Interface | Phoenix terminal |
| | |
| Contact Closure |
| Signal Input | Alarm, Binary input, support TTL, RS-232/422/485 or passive switch button |
| Signal Output | Arbitrary alarm, Binary output, support TTL, RS-232/422/485 or relay output |
| Interface | Phoenix terminal |
| Telephone |
| Phonetic Bandwidth | 8KHz |
| Work Mode | Point to point hot line, program controlling switch/extension mode |
| Distortion | <1% |
| S/N Ratio | >95dB |
| Interface | RJ11 or RJ45 |
| Ethernet |
| Work Mode | Full duplex / half duplex, autosensing |
| Network Speed | 10/100Mbps, autosensing |
| Interface | RJ45 |
| Chassis and Cards |
| Chassis Slots Quantity | 18 slots |
| Compatibility(with cards) | 1~4ch cards(18pcs); 8ch cards(9pcs) |
| Flexibility | Supports mixed installation of different configurations |
| Cards | In 4ch PCB(153x100x10mm) or 8ch PCB size (153x100x25mm)
configurations which require larger size can't be used with this system |
| Electrical.Environmental.Mechanical |
| Operating Voltage | Standalone:220VAC to 5V/12VDC, Rack: dual 220V/-48V AC, card: powered by chassis |
| Operating Temperature | -35°C to +75°C |
| Storage Temperature | -45°C to +85°C |
| Humidity | 0~95% non-condensing |
| Dimension And Weight | Standalone and card: depends on different configurations, Chassis: 19"3U
|
Applications1.Police and safe city monitoring system
2.Express way security protection and toll station system
3.City traffic monitoring system
4.Building and campus monitoring system
5.Industrial monitoring (airport, chemical plant, railway, etc.)
6.Military monitoring (frontier defense, national defense)
7.Electronic power oil field, TV station program broadcasting
8.Gymnasium (live video and audio transmission
Order Details| OM610-1V ↑ 1D ↓ 1P1E WT/R | 1ch video Tx + 1ch RS485 data Rx + 1ch 10/100M Ethernet + 1 Telephone. |
| OM610-1V ↑ 2D ↓ 2A ↑ 1E WT/R | 1ch video Tx + 2ch RS485 data Rx + 2ch audio Tx + 1ch 10/100M Ethernet |
| OM610-1V ↑ 2D ↓ 2A ↑ 2K ↑ WT/R | 1ch video Tx + 2ch RS485 data Rx + 2ch audio Tx + 1ch Contact Closure Tx |
| OM610-2P1EWT/R | 2ch Telephone + 1ch 10/100M Ethernet |
| OM610-2V ↑ 1D ↓ 1P1E WT/R | 2ch video Tx + 1ch RS485 data Rx + 1ch 10/100M Ethernet + 1 Telephone. |
| OM610-2V ↑ 2D ↓ 2A ↑ 1E WT/R | 2ch video Tx + 2ch RS485 data Rx + 2ch audio Tx + 1ch 10/100M Ethernet |
| OM610-4EWT/R | 4ch 10/100M Ethernet |
| OM610-4P2D ↓ WT/R | 4ch Telephone+ 2ch RS485 data Rx |
| OM610-4V ↑ 1D ↓ 4E WT/R | 4ch video Tx + 1ch RS485 data Rx + 4ch 10/100M Ethernet |
| OM610-4V ↑ 1D ↓ 4PWT/R | 4ch video Tx + 1ch RS485 data Rx + 4ch Telephone |
| OM610-4V ↑ 12D ↓ WT/R | 4ch video Tx + 12ch RS485 data Rx |
| OM610-2D ↓ 8PWT/R | 2ch RS485 data Rx + 8ch Telephone |
| OM610-20D ↓ WT/R | 20ch RS485 data Rx |
| OM610-1V ↑↓ 1D ↑↓ 1A ↑↓ 1K ↑↓ WT/R | 1ch bi-di video + 1ch bi-di RS485 data + 1ch bi-di audio + 1ch bi-di contact closure |
| OM610-2D ↑↓ 4A ↑↓ 1E WT/R | 4ch bi-di audio + 2ch bi-di RS485 data + 1ch 10/100M Ethernet |
| OM610-1V ↑ 1D ↑↓ 3A ↑ 2K ↑↓ WT/R | 1ch video Tx + 2ch bi-di RS485 data + 3ch audio Tx + 1ch bi-di contact closure |
| OM610-4V ↑ 2D ↓ 2A ↑ 1E 1P2K ↑ WT/R | 4ch video Tx + 2ch RS485 data Rx + 2ch audio Tx + 1ch 10/100M Ethernet + 1ch Telephone + 2ch Contact Closure Tx |
Shenzhen Olycom Technology Co., Ltd., is a fiber optic transmission equipment manufacturer in China. Our areas of specialty are Fiber Optic Transmission products for CCTV video surveillance, Intelligent Transport Systems and communication networks. We provide reliable and cost-effective Video over Fiber and Ethernet over Fiber solutions.
Our main products are Optical Video Transmitter and Receiver, Fiber Media Converter, HD IP camera, and SFP Optical Transceiver. Apart from that there is a broad product portfolio including CWDM multiplexer, fiber switch, PDH multiplexer, protocol converter, fiber MODEM, fiber LAN card, network booster, tester, and passive components. High quality and competitive price are ensured by professional R&D team and workers.
We konw clients are careful on each detail like packing and labels, and we think we can meet their requirements as long as they listed them to us. If we cannot or even get close, we'd like to take each challenge to bulid up ourselves.
Last but not least, customization, OEM, and ODM services are available whenever required.
