The new LA8.2 line source system is raising the bar of standard line array design by using XLC™ technology, a new proprietary front load for the low and mid frequencies drivers. Acoustic laws are immutable, and cannot be bypassed. Due to the relationship between dimensions and frequency coupling.
By changing the wave front of mid frequencies, the XLC™(eXtended Line Coupling) technology increase the limit of usable mid frequencies and then eliminates the necessity of a specific 3rd mid-range way. XLC™ also increase the efficiency of mid frequencies and then offer capabilities close to a 3 way standard system in a highly
compact 2 way active cabinet.
The LA8.2 is an active two-way system, including two 8-inch (2.5"voice coil) weatherproof XLC™ front loaded drivers and one 1.75-inch voice coil compression driver coupled to proprietary planar wave guides for HF reproduction providing a 100° horizontal coverage and 0° to 12° vertical coverage. As a full range system, the frequency response shall be 80 Hz to 20 kHz (-10 dB).
The cabinet shall be installed using a dedicated rigging bumper and accessories, it has been designed following the guidelines of BGV-C1 (German standard for Audio Rigging).
The cabinet constructed of 18 mm birch plywood with internal braces include 2 wood integrated handles on the rear and have 4-points aluminum rigging system is installed on the sides of the cabinet, allowing up to 16 elements.
The cabinet is finished in excellent black water-based textured paint and the front of the cabinet shall be protected by 1.8 mm thick acoustically transparent perforate steel with 0.5mm silk inside.
Technical specifications
Frequency response@-10dB: 80 Hz ~20 kHz
Coverage angle@-6 dB H:100degree
V: 0 ~12 0 1 2 4 8 12 degree inter enclosure angles)
Sensitivity@1w/1m LF: 103 dB/SPL, HF:111 dB/SPL
Maximum SPL@1m f >90Hz, AES/Peak : LF: 130 dB @ AES / 136 dB @ Peak / SPL
HF:130 dB @ AES / 136 dB @ Peak / SPL
Nominal impedance: LF: 2 x 8 ohms, HF:16 ohms
Power rated: LF: 2 x 250W @ AES / 2 x 1000W @ Peak, HF:80W @ AES / 320W @ Peak
Components: LF: 2 x 8-inch weatherproof cone drivers, HF: 1 x 1.5-inch throat compression driver
Cabinet: 18mm birch plywood with internal reinforcement, finished in water-based textured paint
Finish: Black, other colours on request
Connectors: 2 x Neutrik Speakon NL8MP
Dimensions: (H x W x D) 290 x 826 x 400mm
Weight Unit net weight: 31kg
Unit gross weight: 33kg
Rigging: 4 points flying system, Aluminum accessories on both sides
Type of load LF: XLC™ Horn, HF: Proprietary planar wave guide
LTS ACOUSTICS CO., Ltd runs internationally in the field of electro-acoustics as a manufacturer of loudspeaker systems and electronics for high quality speech and music reproduction or sound reinforcement in public places.
Our brands: Trans-Audio; CTAL
LTS Acoustics have a good reputation in this market as a result of the use of technological developments, system integration principles, quality of construction and standard of service.
We worked in close collaboration with the best worldwide loudspeakers manufacturers such as PHL Audio(France), Beyma(Spain), Eminence(USA), BMS(Germany) etc.
And we maintain the strict tests throughout the whole manufacturing process based on ISO 9001: 2008 UKAS quality management and products are complied with CE TUV Germany certificate.
Our vision is to secure the future through continuous improvement and innovation in order to seeking new opportunities, meeting new demands and challenges, keeping pace with new technology to achieve manufacturing excellence.
