Split Heat pipe solar water heater;
Description:
The solar water heating system is consisted of solar collector, heat preservation water tank, solar power workstation and the pipe. The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heat collecting. The absorbing percentage of the glass vacuum collector is more than 94%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 degrees centigradeonly in 2.5 hours. The water tank uses enamel as internal bladder and polyurethane integral foaming as heat preservation material to improve the heat preservation ability. And it makes the system be used as usual under minus 50 degrees centigrade. The high corrosion-resistant and good heat preservation PPR pipe is used as the system's pipe, so it adds the good efficiency and long service of the system.
Working principle:
1. When the temperature of the Split Solar Water Heater heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.
Manifold |
SUS 304 Food Grade Stainless Steel |
Frame |
Stainless Steel |
Header Pipe |
Copper |
Insulation |
Polyurethane 55mm |
Rubber Seals and Rings |
UV stabilized high temperature silicon rubber |
Optimal installation angle |
30-70°Vertical,0°Horizontal |
Maximum Operating Pressure |
6bar-85psi |
Pressure Drop |
700Pa 3.3L/min for 20 tube manifold |
Optimal flow rate |
0.1L/min/tube-0.026G/min/tube |
Performance Data |
Conversion Factor: ho=0.717
Loss Coefficients:a1=1.52,a2=0.0085 |
SNUG solar Energy Co., Ltd. is a professional solar products manufacturer of all types of solar water heaters and air heat pumps, like low pressure solar water heater, pressuried solar water heater, split pressurized solar water heater, flat solar collector and so on
Our company was established in 2006, We focuses on solar energy exploration and attaches great importance to leading-edge research and innovation to make itself a step forward in future market, as a manufacturer, from the initial tube source to final finished products, we exactly control our quality at every working procedure in order to supply the best quality for customers. We also have a good after-sales service system and can gain the feedback in time.
We already passed the factory audit from TUV Germany, and we already have CE, ISO 9001 certificate. So please rest assure that we have very good quality and best service after sell. We supply you 7 years guarantee and deliver time is 12 days.
Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uphold the "quality, integrity and pragmatic, motivated, service-oriented" business philosophy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. My company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.