Resin Tank Water Softener Filter Purifier

1.Product Introduction
First, with strong-acid out from raw water, outlet water is relative softener water cation resin, Mg+ and Ca+ are exchanged out from raw water. Thus, water softener out from water softener is relative softer water. In this phase,Chemical reaction is 2RNa+Ca+(mg2+)=R2Ca(mg)+2Na+.The resin must be regenerated when it had adsorbed enough Ca+, Mg+, With 2%-5% strong salt water (with flow rate of 6/m/h), it exchanges out Ca+,Mg+from the resin, then whose ability of ion exchange will be recovered. In this step, the chemical reaction is: R2Ca+2Na+=2RN+Ca2+. At ast,discharging waste water.

2.Type choice
Softener equipment applies cation resin for softing raw water, its main target is to use cation resin to adsorp (main parts of), encreasing the hardness of raw water.
A). Users can choose manual operation control system for saving cost.
B) If users using for 24 hours can accord to water using time choosing for rebirth
C) Uses can according to water quality requirement: First grade multi-media filter, which can remove mud, rust, colloid and suspension in water. Second grade activated carbon filter, which can remove color, olfactory, biochemistry organic in water and encrease the left oxygen value and pollution in water. Third grade equiped softener equipment.
D) Effluent water capacity achieves the water supply of national low-pressure bioler.
E) Time control- type; Flow control- type. In working, apply single-tank, double-tank and multi-tank etc. Other varied combination method. When choosing, users can choose as their needs. In operation, it has not only automatic function, but also is manual operation.

3.Application
System automatic water softener widely used in steam bioler,heating bioler,exchanger,air conditioner, and other systems water softener,also used in hotel,restruant,office, and other life water treatment and food,drinking,wine,washing, textile, chemical, medicine and other industrial softener water treatment.

4.Type :dual-tank and dual-valve, two tanks work simultaneously but regenerate at different time
Model	water output	Resin-tank	Brine-tank(Liter)		Resin	connecting pipe(inch)
	(m³/hour)	(diameter*Height)			(kg)
ZL-II-0.5A	0.5	200×1200	60		40	3/4
ZL-II-1A	1	250×1400		60	80	3/4
ZL-II-2A	2	300×1400	100		120	1
ZL-II-3A	3	350×1650	200		160	1
ZL-II-4A	4	400×1800	200		240	1
ZL-II-5A	5	500×1800	200		360	1
ZL-II-6A	6	600×1850	350		480	1.5
ZL-II-10A	10	750×1850	500		720	1.5
ZL-II-18A	14-18	900×1850	500		720	1.5
ZL-II-25A	20--25	750*1850	500		720	2
ZL-II-36A	30--36	900*1900	800		1040	3
ZL-II-50A	45--50	1200*2400	1000		1440	3
ZL-II-70A	60--70	1200*2400	1500		2000	3
ZL-II-100A	80--100	1500*2500	2000		3200	3

5.Type: dual-tank and single valve,one work one standby
Model	water output	Resin-tank	Brine tank		Resin	connecting pipe(inch)
	m³/hour	(diameter*Height)	(Liter)		(kg)
ZL-II-1B	1	250×1400		60	80	3/4
ZL-II-2B	2	300×1400	100		120	1
ZL-II-3B	3	350×1400	100		160	1
ZL-II-4B	4	400×1650	200		240	1
ZL-II-5B	5	500×1750	300		360	1
ZL-II-6B	6	600×1850	350		480	1.5
ZL-II-10B	8--10	750×1900	500		720	1.5
ZL-II-18B	12--18	900*2400	800		1040	2
ZL-II-25B	20--25	1000*2200	1000		1440	2
ZL-II-35B	30--35	1200*2400	1500		2000	3
ZL-II-50B	40--50	1500*2400	2000		3200	3