Overview:
Work Frequency: CDMA450, LTE700 (A/B/C/D), IDEN800, CDMA800, GSM900 & EGSM, DCS1800, PCS1900, CDMA2000, WCDMA2100, AWS2100, LTE2600 and so on.
SYN-DB10~20-S dual system signal repeater series are designed for the mobile operator indoor coverage solution. They are used in the some hot sites, where have the high traffics and are not worth to install a Micro BTS. Using the band selective repeater can easily realize the fast coverage.
The mobile operator could use it to amplify its own signal only and make it better than the signal of rivals which can lead the competition.
Advantages:
1 With IF SAW filter technology for good out of band rejection, the band selective repeaters is designed to selective specific sub-bands of mobile system.
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.31dB MGC (Manual gain control) 1dB per step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. The repeater can be locally and remotely monitored and controlled through its monitor module by OMT or OMC software. (Optional)
|
Electrical specification |
Uplink |
Downlink |
|
Frequency Range |
Customized upon request |
|
Max .Gain |
SYN-DB10-S |
≥ 60dB |
≥ 65dB |
|
SYN-DB15-S |
≥ 65dB |
≥ 65dB |
|
SYN-DB20-S |
≥ 65dB |
≥ 70dB |
|
Max .Output Power |
SYN-DB10-S |
≥ 10dBm |
≥ 10dBm |
|
SYN-DB15-S |
≥ 12dBm |
≥ 15dBm |
|
SYN-DB20-S |
≥ 15dBm |
≥ 20dBm |
|
Band width (-3dB) |
Available upon request |
|
MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
|
Automatic Level Control |
≥ 20dB |
|
Gain Flatness |
≤3dB(P-P) |
|
Noise Figure |
≤6dB |
|
VSWR |
≤2.0 |
|
Group Delay |
≤5μs |
|
LED Alarm |
Standard |
|
Power LED |
Green light when power on. |
|
ALC LED |
Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB |
|
Mechanical Specifications |
Standard |
|
I /O Port |
N-Female |
|
Impedance |
50 ohm |
|
Operating Temperature |
-25ºC~+55ºC |
|
Environment Conditions |
IP40 |
|
Dimensions |
250x300x52mm |
|
Weight |
≤ 4.5Kg |
|
Power Supply |
Input AC90~264V,output DC10V / 7A |
|
Software |
Optional |
|
Local Remote Monitoring |
Via USB Port or SMS or GPRS Modem |
Shenzhen SYN Technology Co., Ltd. is a fast developing company in telecommunication industry, who is committed herself to the mobile network optimization. With the development of the urbanization, millions of cellular signal blind areas are formed per day. The operators BTS can't meet the subscribers demands. So the signal repeater can provide a fast and cost-efficient solution to solve the subscribers' problems when they want to make a call or use the wireless internet.
Our main products are indoor signal repeater, antenna and accessories. The products line is following:
Single system signal repeater;
Dual system signal repeater;
Triple system signal repeater;
Four system signal repeater;
Pre-amplifier and Trunk-amplifier
Antennas, Coupler, splitter and accessories;
As per the customers' requirements, we designed different output power for different area, such as, 10-150sq. M, 100-600sq. M, 300-800sq. M, 600-1500sq. M, 800-2000sq. M, 1500-2500sq. M, 2000-3000sq. M ^ And combination the trunk-amplifier, we can do the solution for bigger area. We can manufacture the signal repeater for all the countries, which can supports the CDMA, IDEN, GSM, DCS, PCS, WCDMA, UMTS, LTE frequencies.
Our company insists the strict QC control system, including the IQC system, the self-checking on each step of production and FQC. Besides that, we also have the special supplier management department to ensure the raw materials' quality. All of our products has1 year Guarantee. And the after-service is forever.
SYN, for short of the "Solution of Your Need". We not only provide you the signal repeater, but also provide our customers the solution.
Now we are fighting for becoming your first choice and best choice. Sincerely welcome your esteemed company cooperate with us.
