OverviewThe elegant commercial air purifier
The FX601N air purifier is a medical grade air purifier and one of the most advanced commercial air purifiers on the market. The top air outlet design is simple and reduces air drag and noise in order to maximize the air change rate. The distinctive trendy design will fit well with decoration of the room. The air purifier utilizes multi-stage air cleaning technologies, including electronic cell, activated carbon filter, as well as an UV-photo catalytic system to suit for commercial, medical or industrial environments. The pollutant monitoring system constantly detects the pollutant in the air and shifts the running mode of the unit.
Clinical research study shows that the FX601N air purifier has excellent performance in real hospital and clinic environment to clean and sterilize the indoor air.
Powerful two-stage electronic cell The two-stage electronic cell captures fine particles down to 0.3 micron. The cell offers benefits over other air purifications technologies such as HEPA filtration which requires expensive filter and it can even become "production bed" for many harmful forms of bacteria.
Smart check alarm system The unit equips with a smart power supply that allows the CHECK light of the unit beep and flash when the electronic cell does not work properly. It is a very important feature for the electronic air purifiers.
Dual filters - activated carbon filter and molecular sieve filterThe unit has an extra molecular sieve filter in addition to activated carbon filter so that the dual filter combination will strongly remove many kinds of organic compounds and odors.
Powerful UV light-photo catalytic systemThe unit uses very intensive UV light to destroy the microorganisms. The photo catalytic filter will effectively decompose many kinds of organic compounds.
Product description1. The washable metal mesh pre-filter captures large particles to contribute the other filters longer filter lifetime.
2. The electronic cell discloses a negative charge to particles that pass through the unit and collects them on opposite charged metal plates. The electronic cell can capture particles down to a size of 0.01 micron. It is easy to clean and need low maintenance.
3. The activated carbon filter locks in chemicals and odors. It will continue working for many months before need to replace.
4. UV-C light can destroy airborne microorganisms such as bacteria, mold, and viruses.
5. Photo catalyst can effectively reduce odors and restrain the activity of microorganisms. The use of photo catalyst is permanent and not need replacement.
6. The negative ion generator releases the high concentration level of negative ions to make the air more pure and fresh.
Operation & maintenanceControl panel
Buttons
:POWER Button
Turns the purifier On and Off
SPEED Button
When the SPEED button is pressed the airflow rate changes as shown below: L -- M -- H -- A (Auto mode).
TIMER Button
Press the TIMER button to select the time for operation. The timer setting switches as shown: 1h -- 2h -- 4h -- C (Timer cycle function) -- cancel timing.
UV LAMP Button
When the button is pressed, it will turn on the UV lamp, pressing again will turn off the UV light.
NEG.ION Button
When pressed, the generation of ions will cease and the negative ion generator light will go out.
Indicator lights:
POWER indicator light:
Connect the power, the indicator light will be lighting up white.
1- SPEED indicator light
2- Auto mode indicator light:
When this indicator is lighting up, the unit is at Auto mode.
3- TIMER indicator light
4- TIMER CYCLE indicator light:
When this indicator light is lighting up, the unit will automatically start to work for 2 hours and stop 2 hours, circulation in turn.
5- LOCK buttons indicator light:
When this indicator light illuminates all the buttons are locked.
6- UV LAMP indicator light:
When the indicator light flashes, it tells the time for UV lamp replacement.
7- NEG.ION indicator light
8- CELL CLEAN DRY FUNCTION indicator light:
When this indicator is lighting up, the electronic cell does not charge for 2 hours allowing time to dry the cell thoroughly before use.
9- NON-POWER SUPPLY FUNCTION indicator light
10- CLEAN ELECTRONIC CELL indicator light
11- CHEMICAL FILTER LIFE indicator light
12- ACTIVATED CARBON FILTER LIFE indicator light
13- CHECK indicator light:
When the cell-power supply system encounters a problem the indicator light flashes red with beeping.
Easy and low cost maintenanceWhen the filters needs to be washed or replaced, just open the front panel, lift out the old filters and drop the new ones in. No tools are required.
Specifications| Product name | Electronic air purifier |
| Model No. | FX601N |
| Power requirement | a.c220V, 50Hz |
| Rated power | Max. 181.2W |
| Motor | 220V, 50Hz |
| Noise level | < 55dB (A) |
| Neagtive ion | 3x106 /cm3 |
| UV lamp | 2x24W |
| Fuse | a.c250V, 2A |
| Main parts | Pre filter, electronic cell, activated carbon filter, chemical filter, UV lamps and photo catalyst, negative ion generator |
| Dimensions | W500mm x D345mm x H1685mm |
| Weight | 56.1kg |
| Packing list | FX601N machine, power cord, remote control (including a battery), extra fuse, operation manual, QC pass card and packing list |
| Speed | 3 speeds |
| Timer | 1hr, 2hr, 4hr |
| Timer cycle mode | Automatically stop 2 hours after 2 hours running, circulation in turn |
| Auto mode | The fan speed is automatically switched depending on the amount of pollution in the air |
| Alarm light | The indicator lights for cell cleaning, activated carbon filter and UV lamp replacement |
| Power cord | 3 phase detachable power cord, L=3m |
| Operation | Button operation, remote control operation |
